2022 Latest 100% Exam Passing Ratio - E_S4HCON2020 Dumps PDF
Pass Exam With Full Sureness - E_S4HCON2020 Dumps with 55 Questions
NEW QUESTION 14
What do you do to prepare the database migration option of a SUM procedure?
There are 3 correct answers
Response:
- A. Move the SAPM update archive into the download folder
- B. Extract the SAP HANA database installation archive
- C. Extract the SAP HANA client installation archive
- D. Move the R3trans update archive into the download folder
- E. Move the stack.xml update file into the download folder
Answer: A,C,E
NEW QUESTION 15
You performed a custom code check for an SAP S/4HANA conversion. In which transactions can you review the results?
There are 2 correct answers to this question.
Response:
- A. SYCM (Simplification Database Content)
- B. ATC (ABAP Test Cockpit)
- C. SAT (Runtime Analysis)
- D. SE80 (Object Navigator)
Answer: B,D
NEW QUESTION 16
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime.
The server provides 8 CPU cores. Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center you can see 40 Process Buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
Please choose the correct answer.
Response:
- A. These are 40 pairs of R3load processes, so there are 80 R3load processes running.
- B. SUM is still running in uptime; the number of 40 defined R3load processes is considered.
- C. The number of CPU cores does not allow more than 40 R3load processes to be run in parallel.
- D. There is a maximum of 40 parallel R3load processes within this specific downtime phase.
Answer: A
NEW QUESTION 17
What are the benefits of using the Benchmarking option of the DMO for SUM?
There are 2 correct answers to this question.
Response:
- A. You can obtain migration duration files that can be used to optimize the next runs from a previous benchmark run.
- B. You can find the optimal number of parallel R31oad processes by monitoring host performance.
- C. You can verify that the content of the download directory matches the stack.XML file.
- D. You can record the modification adjustment during migration and use the transports in the next runs.
Answer: A,B
NEW QUESTION 18
You are performing an upgrade of an SAP ECC development system with SUM. What is the earliest point when the upgrade is considered complete and you can allow all dialog users to log on to the system?
Please choose the correct answer.
Response:
- A. During the SUM roadmap step "Postprocessing", after the post procedure steps are complete
- B. After the SUM roadmap step "Execution" is finished and before "Postprocessing"
- C. After the SUM roadmap step "Postprocessing" and post procedure steps are finished
- D. During the SUM roadmap step "Postprocessing", in parallel with post procedure steps
Answer: C
NEW QUESTION 19
The SUM procedure stops with an error during uptime. How can you identify the current phase, the one in which SUM encountered an error?
There are 2 correct answers to this question.
Response:
- A. Check the messages shown by the SUM UI
- B. Check the system log (transaction SM21) of the SAP system
- C. Check the most recent entries shown in file sapevt.trc
- D. Check the most recent entries in SAPup.log
Answer: A,D
NEW QUESTION 20
During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:
- A. In the corresponding R3trans log files of this phase
- B. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
- C. In the job log for the corresponding job in SM37 (Job Overview)
- D. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log
Answer: C,D
NEW QUESTION 21
You are performing an S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of dictionary objects (SPDD)?
Please choose the correct answer.
Response:
- A. Credentials of user DDIC in client 000 of the shadow system
- B. Credentials of a named user in the development client of the development system
- C. Credentials of user DDIC in the development client of the development system
- D. Credentials of a named user in client 000 of the shadow system
Answer: D
NEW QUESTION 22
You are executing a standard SUM procedure to update an SAP system using main configuration mode
"Standard". When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:
- A. Before the downtime starts
- B. Early in the downtime
- C. As part of the cleanup process
- D. At the end of the downtime
Answer: A
NEW QUESTION 23
Regarding an SAP Upgrade, What does the major SAP Note for the version of SUM you are using usually contain?
- A. AA
- B. The link to different patch levels to SUM
- C. An overview about possible upgrade paths
- D. The corrections to the SUM Guide
Answer: B,C,D
NEW QUESTION 24
You downloaded content from the SAP note 1000009 ("ASU Toolbox 2008"). Which transaction needs to be executed to use that content in the ASU Toolbox?
Please choose the correct answer.
Response:
- A. /ASU/UPGRADE (Start ASU Toolbox in Upgrade Mode)
- B. /ASU/SHOW_NOTE (Show SAP Note via Web-Browser)
- C. /ASU/START (Start ASU Toolbox)
- D. /ASU/SSM (ASU Simple Schedule Manager)
Answer: C
NEW QUESTION 25
You are performing an upgrade with SUM using DMO to an AS ABAP 7.50 based SAP system. You entered a specific number of R3Ioad processes during Roadmap step "Extraction".
Where can you change this during the migration via the Utilities option of the SUM UI?
There are 2 correct answers to this question
Response:
- A. In DMO Migration Preparation
- B. In Process Control Center
- C. In SUM Parameters
- D. In SUM Phaselist
Answer: B,C
NEW QUESTION 26
Which additional configuration options are offered by SUM when selecting "Switch expert mode on" in main configuration option "Standard"?
There are 2 correct answers to this question.
Response:
- A. Choose the instance number of the shadow instance.
- B. Keep archiving on during the whole procedure.
- C. Use the Near Zero Downtime Maintenance Technology (NZDM).
- D. Reuse a profile for the shadow instance from a previous run.
Answer: A,D
NEW QUESTION 27
What is the benefit of using the file UPGANA.XML from a previous SUM run?
Please choose the correct answer.
Response:
- A. To repeat specific phases during the SUM run
- B. To auto-fill specific fields on selected screens on the SUM UI
- C. To skip selected phases during the SUM run
- D. To make the progress information within SUM UI more accurate
Answer: D
NEW QUESTION 28
You are running an SAP ECC system. For which of the following activities does SUM allow you to use the Near Zero Downtime Maintenance (NZDM) capabilities?
There are 3 correct answers to this question.
Response:
- A. Apply SAP Support Packages.
- B. Use DMO for SUM.
- C. Upgrade the SAP system.
- D. Apply an Enhancement Package.
- E. Perform an SAP S/4HANA conversion including DMO.
Answer: A,C,D
NEW QUESTION 29
How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
Response:
- A. By searching for transport requests that are assigned to the project SAP_ADJUST
- B. By searching for transport requests in the file umodauto.Ist
- C. By searching for transport requests in DIR_TRANS, subdirectory "transport"
- D. By searching for transport requests named <SID>K0<number>
Answer: C
NEW QUESTION 30
You want to perform an SAP S/4HANA conversion using SUM with DMO. Which steps run before the beginning of the technical downtime, independent of your SUM configuration?
There are 3 correct answers to this question.
- A. Import of upgrade and language data from the download directory in phase TABIM UPG
- B. Generation of the new ABAP loads in phase RUN_SGEN_GENER8
- C. Activation of dictionary objects in phase ACT_UPG
- D. Import of dictionary objects from the download directory in phase DDIC_UPG
- E. Creation of application tables in the SAP HANA database in phase EU_CLONE_MIG_DT_CREATE
Answer: A,C,D
NEW QUESTION 31
During a DMO procedure with SUM, after which phase is the repository first available on the target database?
Please choose the correct answer.
Response:
- A. Shadow repository creation (EU_IMPORT*)
- B. Parallel distribution (PARDIST_SHD)
- C. Uptime migration (EU_CLONE_MIG_UT_RUN)
- D. Downtime migration (EU_CLONE_MIG_DT_RUN)
Answer: C
NEW QUESTION 32
You are performing an SAP S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of programs and other non-dictionary repository objects (SPAU)?
Please choose the correct answer.
Response:
- A. Credentials of a named user in the development client of the development system
- B. Credentials of user DDIC in client 000 of the shadow system
- C. Credentials of user DDIC in the development client of the development system
- D. Credentials of a named user in client 000 of the shadow system
Answer: A
NEW QUESTION 33
Which preparational steps must be performed for an SAP S/4HANA conversion?
There are 2 correct answers to this question.
Response:
- A. Install add-on SAP Gateway 7.50
- B. Uninstall Fiori apps not released for SAP_UI 7.50
- C. Delete client 066 (Early Watch Client)
- D. Uninstall industry extensions not supported by SAP S/4HANA
Answer: B,C
NEW QUESTION 34
......
E_S4HCON2020 Exam Certification Details:
| Languages: | English |
| Duration: | 90 mins |
| Sample Questions: | SAP E_S4HCON2020 Exam Sample Question |
Verified E_S4HCON2020 dumps Q&As - 100% Pass from ValidVCE: https://torrentpdf.validvce.com/E_S4HCON2020-exam-collection.html
