2024 Updated Verified Pass NS0-184 Study Guides & Best Courses
Ultimate Guide to the NS0-184 - Latest Edition Available Now
The NS0-184 certification exam is a highly respected certification that is recognized by employers around the world. It is a valuable credential for storage installation engineers who want to advance their careers and demonstrate their expertise in NetApp storage systems.
NEW QUESTION # 23
You are preparing to install a new 2-node AFF A250 system at a customer site with an existing cluster that uses NetApp CN1610 cluster interconnect switches.
In this scenario, what are two valid actions for this installation? (Choose two.)
- A. Create a new 2-node switchless cluster.
- B. Add the new nodes to the existing cluster and switches.
- C. Migrate the existing cluster to new switches and add the new nodes.
- D. Create a new 2-node switched cluster that uses the CN1610 cluster switches.
Answer: C,D
Explanation:
Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Flash_Storage/AFF_Series/Controller_Hardware_Upgrade3A_Adding_AFF_A250_nodes_to_existing_cluster_report_HA_interconnect_errors_and_c
annot_perform_takeover
NEW QUESTION # 24
You are adding new controllers to an existing cluster. As part of the upgrade process, you have updated the BES-53248 cluster switches.
In this scenario.
Which two commands would you use to verify a healthy cluster after the upgrade? (Choose two.)
- A. network device-discovery show -protocol cdp
- B. network interface show -vserver Cluster -fields auto-revert
- C. network port show -ipspace Cluster
- D. network interface show -vserver Cluster
Answer: C,D
NEW QUESTION # 25
You are deploying an 8-node AFF A700 by using BES-53248 cluster switches. During the installation, you notice that ports higher than 16 are not coming online. You verify that the additional licenses are installed.
Which two additional steps must be taken to bring the additional ports online? (Choose two.)
- A. Re-enable each port
- B. Reload the switch
- C. Reload the RCF file
- D. Reload the firmware
Answer: B,C
NEW QUESTION # 26
In ONTAP 9.7 software, how many different replicated databases (RDBs) exist per node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 27
Click the Exhibit button.
As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
- A. client network
- B. cluster LIFs
- C. private network
- D. management LIFs
Answer: B,C
NEW QUESTION # 28
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair with two DS224C shelves with 3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?
- A. Add the shelf to the existing stack.
- B. License NSE and add the shelf to this HA pair as a new stack.
- C. Create a new stack on the HA pair to add the shelf.
- D. Connect the shelf to an HA pair with NSE drives.
Answer: A
NEW QUESTION # 29
You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow non-optimized data paths from the AFF A250 nodes to the existing LUNs on the FAS8700 nodes.
In this scenario, which two ONTAP configuration settings must you verify? (Choose two.)
- A. reporting nodes
- B. switch zoning
- C. failover groups
- D. port sets
Answer: C,D
NEW QUESTION # 30
What are two ways to identify an AFF All SAN Array system? (Choose two.)
- A. Use the cluster image show CLI command.
- B. View the ONTAP System Manager cluster settings.
- C. Use the san config show CLI command.
- D. View the ONTAP System Manager system nodes.
Answer: C,D
NEW QUESTION # 31
Click the Exhibit button.
You are attempting to add a new ONTAP 9.7 node to your ONTAP 9.8 NetApp cluster. After attempting to add the node, it fails as shown in the exhibit.
What are two nondisruptive ways to add the new node to your ONTAP cluster? (Choose two.)
- A. Add the node using the -allow-mixed-version- parameter.
- B. Upgrade the new node from ONTAP 9.7 to ONTAP 9.8.
- C. Revert the cluster from ONTAP 9.8 to ONTAP 9.7.
- D. Re-initialize all the nodes in the ONTAP cluster with ONTAP 9.7.
Answer: A,B
NEW QUESTION # 32
You have an AFF All SAN Array (ASA) cluster that is running ONTAP 9.7. The cluster is configured for Active Directory domain controller access using a domain tunnel.
In this scenario, which two licenses are enabled on the cluster? (Choose two.)
- A. NVMe
- B. CIFS
- C. iSCSI
- D. FCP
Answer: B,D
NEW QUESTION # 33
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Disable out-of-band ACP.
- B. Move the SAS cables to a new stack.
- C. Remove the Ethernet cables.
- D. Enable in-band ACP.
Answer: A,B
NEW QUESTION # 34
In an ONTAP 9.7 cluster, which LIF role is used for sending AutoSupport, establishing Network Time Protocol (NTP), and loading software updates?
- A. node management LIF
- B. data LIF
- C. cluster LIF
- D. cluster management LIF
Answer: A
NEW QUESTION # 35
Click the Exhibit button.
You are installing a new FAS cluster. The management network must be on tagged VLAN 11 for remote administration by a service provider.
Referring to the exhibit, which two ports will allow service provider access to both cluster and node management LIFs? (Choose two.)
- A. e0M-11
- B. e0M
- C. e0a-11
- D. e0b-11
Answer: A,B
NEW QUESTION # 36
After adding two nodes to an FC-enabled cluster, the storage administrator wants to ensure that existing LUNs can use paths on the new nodes.
What is required to complete this task?
- A. Use the storage port rescan command.
- B. Use the lun mapping add-reporting-nodes command.
- C. Use the lun bind create command.
- D. Rescan the bus on the hosts by using the rescan-scsi-bus.sh script.
Answer: A,B
NEW QUESTION # 37
After the Installation of a new NetApp FAS system, you use theNetAppDocs tool for site design documentation.
In this scenario, in which three document formats would you create an inventory report? (Choose three.)
- A. .ps
- B. .xlsx
- C. .docx
- D. .pdf
- E. .html
Answer: C,D,E
NEW QUESTION # 38
A customer is asked to install a new AFF ASA A700 system. During the installation, the customer asks if ONTAP 9.8 is supported with their host's OS version running Windows 2016.
In this scenario, which NetApp tool would verify supportability?
- A. Active IQ OneCollect
- B. Interoperability Matrix Tool
- C. ONTAP System Manager
- D. Active IQ Unified Manager
Answer: C
NEW QUESTION # 39
You completed a 2-node AFF A700 installation according to the poster. You run the disk show -fields owner command and notice that all drives are assigned to node 1.
In this scenario, which tool would you use to access documentation and guidelines to solve the issue?
- A. Active IQ One Collect
- B. NetAppDocs
- C. Active IQ Unified Manager
- D. NET2
Answer: B
NEW QUESTION # 40
You are asked to add a new HA pair to an existing 2-node switchless AFF A220 cluster. You must first convert to a 2-node switched cluster using Broadcom BES-53248 cluster switches.
Which two conditions must be fulfilled before you start the migration? (Choose two.)
- A. The 2-node switchless configuration must be properly set up and functioning.
- B. All cluster LIFs must have an MTU size of 1500.
- C. All cluster LIFs must be in the up state and on their home ports.
- D. The "Enabled Switchless Cluster" option must be manually set to "false".
Answer: A,C
NEW QUESTION # 41
Click the Exhibit button.
During an ONTAP cluster handover procedure, your customer asks how to identify and solve issues that might occur on the newly deployed array.
Referring to the exhibit, which two widgets would the customer use to help with these issues? (Choose two.)
- A. Contracts and Warranties
- B. ASE Corner
- C. Active IQ
- D. Guide Me
Answer: A,D
NEW QUESTION # 42
Click the Exhibit button.
Immediately after installing a 4-node FAS8200 cluster, you discover that node, "cluster1-02", must be removed from the cluster. You want to use the cluster remove-node command to remove the node.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Make the node ineligible by using the cluster modify -eligibility false command, then remove the node.
- B. Remove the node, then the cluster will elect a new master to remain in quorum.
- C. Verify that high availability is configured for failover to the HA partner, then remove the node.
- D. Move Epsilon to cluster1-02, then remove the node.
Answer: C,D
NEW QUESTION # 43
Click the Exhibit button.
You are setting up a new AFF A700 into a new rack at a customer's site. The customer asks you to plan for simplified future growth.
Referring to the exhibit, how would you satisfy this requirement?
- A. Option 3
- B. Option 4
- C. Option 2
- D. Option 1
Answer: C
NEW QUESTION # 44
You have added two new AFF A250 nodes to an existing 4-node cluster with NetApp CN1610 cluster network switches. Although the nodes can join the cluster, the storage failover show command output shows that the NVRAM log is not synchronized, and it cannot reach the partner over an HA interconnect.
In this scenario, which two statements are true? (Choose two.)
- A. The AFF A250 requires switches with 25GbE port support.
- B. The AFF A250 uses the same port for the cluster and the HA interconnect.
- C. The AFF A250 uses different ports for the cluster and the HA interconnect.
- D. The AFF A250 requires switches with 40GbE port support.
Answer: A,C
NEW QUESTION # 45
After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view telemetry dat
a. The customer also wants to receive online information about any risks with the cluster and potential best-practice gaps.
Which tool satisfies the customer's requirements?
- A. Cloud Manager
- B. Interoperability Matrix Tool
- C. Active IQ Digital Advisor
- D. Spot by NetApp
Answer: C
NEW QUESTION # 46
......
Dumps MoneyBack Guarantee - NS0-184 Dumps Approved Dumps: https://torrentpdf.validvce.com/NS0-184-exam-collection.html
