Achieve the HPE6-A81 Exam Best Results with Help from HP Certified Experts [Q31-Q55]

Achieve the HPE6-A81 Exam Best Results with Help from HP Certified Experts

Provide HPE6-A81 Practice Test Engine for Preparation

The HPE6-A81 certification exam is the highest-level certification offered by Aruba ClearPass. It is an expert-level exam, and individuals who pass it demonstrate a high level of skill and knowledge in the field of network access control. The certification exam consists of 60 multiple-choice questions, and individuals have 90 minutes to complete it.

The HPE6-A81 exam covers a range of topics related to ClearPass, including authentication and authorization, endpoint profiling, guest access, posture assessment, and enforcement policies. The exam also tests candidates' knowledge of advanced ClearPass features such as integration with third-party systems, troubleshooting and performance tuning, and multi-factor authentication. Passing the HPE6-A81 exam demonstrates that an IT professional has the skills and knowledge required to design and implement ClearPass solutions that meet the needs of modern organizations.

 

NEW QUESTION # 31
A corporate Clear Pass Cluster with two servers located at a single site, has both Management and Data port IP addresses configured. The Management port IPs art in the DataCenter networks subnet, while the Data port IPs are in the DMZ. What is the difference between using one Virtual IP for the AAA traffic versus sending AAA requests to the physical IPs for each server' (Select two.)

• A. The failover can be accomplished only by using Virtual IP
• B. By using the Virtual IP, the failover wait time is faster than using individual server IPs.
• C. Using the one Virtual IP can provide failover.
• D. One Virtual IP can be used together with the individual server IPs for load balancing.
• E. The Individual IPs can provide failover and load balancing.

Answer: B,C

NEW QUESTION # 32
Refer to the exhibit.

What enforcement profile will be assigned to a client who has successfully completed the user and machine authentication with UNKNOWN posture token?

• A. Redirect to Aruba Dissolvable_page Profile
• B. Redirect to Aruba Quarantine Profile
• C. Redirect to Aruba OnBoard Portal
• D. Deny Access Profile

Answer: A

NEW QUESTION # 33
When building an SNMP-based enforcement profile what option can you assign to the user as actions? (Select three).

• A. Enforce a VLAN ID for the client
• B. ClearPass Downloadable Role
• C. Enforce Firewall policies
• D. Reset the connection after the settings has been pushed
• E. Set a session timeout for the client
• F. Send captive portal web re-direct URL

Answer: A,E,F

NEW QUESTION # 34
Refer to the exhibit.

Your customer has configured the 802.1 X service enforcement conditions with the Endpoint profiling dat a. When the client connects to the network. ClearPass successfully profiles the client but the client always receives an incorrect enforcement profile The configurations in the Aruba controller are completed correctly What is the cause of the issue?

• A. The option, use cached roles and posture from previous sessions should be enabled.
• B. An additional authorization source should be configured for profiling to work.
• C. The enforcement policy conditions configured with profiling data are not correct
• D. The enforcement policy rules evaluation algorithm is not configured correctly.

Answer: A

NEW QUESTION # 35
Refer to the exhibit.



A customer hat configured the Aruba Controller for administrative authentication using ClearPass as A TACAC5 serve' During tasting, the read-only user is getting the root access role What could be a possible reason for this behavior? (Select two.)

• A. On the Controller, the TACACS authentication server is not configured for Session authorization
• B. The read-only enforcement profile is mapped to the root role
• C. The ClearPass user role associated to the read-only user is wrong.
• D. The Controller's Admin Authentication Options Default role is mapped to root
• E. The Controller Sarver Group Hatch Rules are changing the user role.

Answer: C,D

NEW QUESTION # 36
A customer has a Clear Pass cluster deployment with four servers, two servers at the data center and two servers at a large remote site connected over an SO-WAN solution. The customer would like to implement OnGuard. Guest Self-Registration, and 802.1 X authentication across their entire environment. During testing the customer is complaining that users connecting to an Instant Cluster Employee S5ID at the remote site, with the OnGuard Persistent Agent installed are randomly getting their health check missed.
What could be a possible cause of this behavior?

• A. The traffic on the TCP port 6658 is congested due to the fact that this port is also used by the IPSec keep-alive packets of the SO-WAN solution.
• B. The Aruba-user-role received by the IAP is filtering the TCP port 6658 to the Clear Pass servers and after 10 seconds the SSL fallback gets activated and randomly generates the issue
• C. The OnGuard Clients are automatically mapped to the Policy Manager Zone based on their IP range but an ACL on the switch could be blocking access.
• D. The ClearPass Policy Manager zones have been defined but the local IP subnets have not but properly mapped to the zones and the OnGuard Agent might connect to any of the servers in the cluster.

Answer: A

NEW QUESTION # 37
Refer to the exhibit.

You are doing a ClearPass PoC at a customer site with a single Aruba Mobility Controller. The customer asked for a demonstration of a simple Web Login functionality. You used a service template to create the guest services. During testing, the user gets redirected back to the weblogin page with an Authentication failed message The guest configurations on the Aruba Mobility Controller are configured correctly Why would the guest fail to authenticate successfully?

• A. The authentication source mapped in the service is incorrect It should be mapped as [Guest Device Repository! (Local SQL DB].
• B. The username and/or password used for authentication is incorrect Re-enter the correct password on the weblogin page.
• C. The Unique-Device- Count does not allow any Client devices. Update the Enforcement policy condition: Unique-Device-Count.
• D. The username used for authentication does not exist in the Guest User Database. Create a new user and authenticate again

Answer: C

NEW QUESTION # 38
Refer to the exhibit.

You configured the Wired MAC - Auth service enforcement conditions with the Endpoint profiling data When mac-auth based clients connect to the network, ClearPass assigns Deny access profile. The customer has sent you the above screenshots How would you resolve the issue?

• A. Create a new condition in first position with Type and operator as Authorization (Endpoint Repository]:Category NOT_EXISTS with action as Limited access profile allowing only DHCP service.
• B. Change the Rules evaluation algorithm in the Enforcement policy of HPE ArubaOS Mac auth policy as "select all matches" and add the CoA action as HPE Bounce switch port in the profiler tab.
• C. Create a new condition in last position with Type and operator as Tips:Role EQUALS [User Authenticated] with action as Allow access profile permitting any services and any ports to do profiling.
• D. Create a new condition in the first position with Type and operator as Authorization [Endpoint Repository] Category NOT_EXISTS with action as Limited access profile and ArubaOS wireless terminate session

Answer: B

NEW QUESTION # 39
Refer to the exhibit.

A customer has just configured a Posture Policy and the T 2 -Health check Service. Next they installed the OnGuard Agent on a test client connected to the Secure_Employee SSID. When they check Access Tracker they see many WEBAUTH requests are being triggered What could be the reason'

• A. TCP port 6658 is not allowed between the client and the ClearPass server.
• B. OnGuard Web-Based Health Check interval has been configured to three minutes.
• C. The OnGuard Agent trigger the events based on changing the Health Status.
• D. The OnGuard Agent is connecting to the Data Port interface on ClearPass.

Answer: B

NEW QUESTION # 40
Which statements art true about controller-initiated and server-initiated login method? (Select two)

• A. server-in it will login method should be used if the guest user s network login will be handled by the wired switch by standing the authentication request to (PPM when the user attempts a login
• B. Controller-initiated login method should be used of the guest user's network login will be handled by the guest browser to perform the HTTP port when the user attempts a login
• C. server-initiated login method should be used if the guest user's network login will be handled by ClearPass by sending the authentication request to itself when the user attempts a login
• D. server-initiated login method should be used if the guest users network login will be handled by the ClearPass by standing a CoA after authentication request is posted to itself when the user attempts a login
• E. Controller-initiated login method should be used if the guest user's network login will be handled by the controller-based AP to perform the HTTP post when the user attempts a login.

Answer: A,B,C

NEW QUESTION # 41
Under OnBoard Management and Control, which option will deny the user from re-enrolling one of his devices with Onboard?
View by Certificate >> Click on the device >> Delete certificate

• A. View by Username >> Click on the user >> Delete Actions >> Delete all devices
• B. Delete this client certificate View by Dev >> Click on the device
• C. Click on the device >> Revoke certificate >> Revoke this client certificate
• D. Manage Access >> Deny access to this device View by Certificate

Answer: C

NEW QUESTION # 42
Refer to the exhibit.

You have set up a home lab for ACCX exam preparation with Aruba Clear Pass integrated with Aruba Controller and Instant Access Point Guest Mac Caching functionality is configured only for Aruba Controller's guest SSID and a common Web Login page is configured for both NAD devices You tested and verified the mac caching functionality for a client by connecting it to the Aruba Controller's guest SSID.
What will happen when you disconnect the client from Aruba Controller's guest SSID and connect it to Instant APs guest SSID?

• A. The client does not have to complete any authentication as the re-connection was immediate.
• B. The client will bypass the captive portal authentication by completing the MAC authentication.
• C. The client will be redirected to the captive portal page to complete the web authentication.
• D. The client will fail the mac authentication and will be redirected to the captive portal page.

Answer: B

NEW QUESTION # 43
While configuring the service rule conditions which NAS-Port-Type value should be used to differentiate the service for wired and wireless authentication?

• A. Ethernet (5) and Wireless-802 11 (9)
• B. Ethernet (15) and Wireless-802 II (19)
• C. Ethernet (19) and Wireless-802 11(18)
• D. Ethernet (O)and W.reless-802 11 (1)

Answer: A

NEW QUESTION # 44
Refer to the exhibit.

A customer it troubleshooting a client not getting the SHV posture updated and the OnGuard agent shows the Health Status Not Known. What could the user do to update the health status?

• A. change the Policy Manager Zone mapping and add the WIRED interface range
• B. modify the agent.conf file and add the WIRED interface to it
• C. reinstall the OnGuard agent from the Wired interface
• D. connect using an interface that is configured as Managed Interface

Answer: B

NEW QUESTION # 45
Refer to the exhibit.

A customer has incomplete information for endpoints in the Endpoint Repository. In order to make accurate decisions about what types of devices are connecting to the network. ClearPass is enabled to process the device information from IF-MAP interface, but no updates are received. What can the customer do to update those endpoints using IF-MAP?

• A. Configure IF-MAP on all networking devices to send additional information to ClearPass
• B. Configure IF-MAP only on Aruba Mobility Controller, providing ClearPass username and password
• C. Configure the authentication service to Audit the endpoints using, the embedded Nmap Server
• D. Configure ClearPass Management IP in the DHCP Helper address

Answer: D

NEW QUESTION # 46
Your customer has recently implemented a seIf-registration portal in ClearPass Guest to be used on a Guest SSID broadcast from an Aruba controller Your customer has started complaining that the users are not able to reliably access the Internet after clicking the login button on the receipt page They tell you that the users will click the login button multiple times and after about a minute they gam access.
What could be causing this issue?

• A. The self-registration page is configured with a 1 minute login delay.
• B. The enforcement profile on ClearPass is set up with an IETF:session delay.
• C. The guest users are assigned multiple DNS servers delaying DNS response.
• D. The guest users are assigned a firewall user role that has a rate limit.

Answer: B

NEW QUESTION # 47
A customer has deployed an OnGuard Solution to all the corporate devices using a group policy result to push the OnGuard Agtnts. The network administrator is complaining that soma of the agents are communicating to the ClearPass server that is located in a DMZ. outside the firewall The network administrator wants all of the agents System Health Validation traffic to stay inside the Management subnets.
What can the ClearPass administrator do to move the traffic only to the ClearPass Management Ports?

• A. Filter TCP port 6658 on the firewall, forcing the OnGuard agent to use the ClearPass Management port.
• B. Edit the agent.conf file being deployed to the clients to use the ClearPass Management Port for SHV updates
• C. Select the correct OnGuard Agent installer, and use the one configured for Management Port for the clients.
• D. Configure a Policy Manager Zone mapping so the OnGuard agent will use the Management Port IP.

Answer: A

NEW QUESTION # 48
There is an Aruba Controller configured to stand Guest AAA requests to ClearPass If the customer would likt tht most effective way to ensure the lowest license usage counts, how should the controller be configured?

• A. Aruba Controller will send stop messages only if EAP termination and Interim accounting are enabled.
• B. Aruba Controller will send stop messages if RADIUS Accounting Server Group is defined in the authentication profile.
• C. Aruba Controller will send stop messages only if both accounting and Interim accounting are enabled.
• D. Configure EAP Termination on the Aruba Controller and the client will send a stop message.

Answer: B

NEW QUESTION # 49
You art deploying Cleat Pass Policy Manager with Guest functionality for a customer with multiple Aruba Networks Mobility Controllers. The customer wants to avoid SSL errors during guest access but due to company security policy cannot use a wildcard certificate on ClearPass or the Controllers.
What is the most efficient way to configure the customer's guest solution? (Select two.)

• A. Build one Web Login page with vendor settings for controller (company domain)
• B. Install multiple public certificates with a different Common Name on each controller
• C. Build multiple Web Login pages with vendor settings configured for each controller
• D. Build one Web Login page with vendor settings for captiveportal-controller (company domain)
• E. Install the same public certificate on all Controllers with the common name "controller.{company domain)

Answer: A,B

NEW QUESTION # 50
A customer is troubleshooting the OnGuard Client Activity and is looking into the Live Monitoring -> OnGuard Activity section. What is the Status field representing for this client ?

• A. the Client is successful authenticated
• B. the Client health status is HEALTHY
• C. the Client is online and sends keep-alive messages
• D. the Client has been successfully profiled

Answer: D

NEW QUESTION # 51
Refer to the exhibit.

A customer has configured Onboard in a cluster. After the Primary server's failure, the BYOD devices fail to connect to the network. Which step below is the best starting point when troubleshooting'

• A. Reboot the active ClearPass server and reconnect the client to the SSID by selecting the correct certificate when prompted.
• B. Check if a DNS entry is available for the ClearPass hostname in the certificate, resolvable from the DNS server assigned to the client.
• C. Check EAP certificate on the secondary node is issued by the same common root Certificate Authority (CA).
• D. Verify the CPPM hostname in OSCP URL under TLS authentication method is updated to localhost instead of primary server's hostname.

Answer: D

NEW QUESTION # 52
Which statements art true about Aruba down loadable user roles? (select three)

• A. Administering downloadable user roles can be difficult for a large enterprise.
• B. Can be applied only on ports or WLAN users authenticated by ClearPass.
• C. Downloadable role names must be defined in Aruba switch or controller.
• D. Aruba downloadable user role is a built in enforcement template in ClearPass.
• E. Aruba downloadable user role are universally available across the environment.
• F. Can use these result for other authentication methods not involving ClearPass.

Answer: B,C,F

NEW QUESTION # 53
A customer has created a Guest Self-Registration page that they would like to use it as 'template' for all the new pages that are going to be created from now on. Their goal is to ensure that the header and footer on every page are the same, and any edits made to them are automatically reflected on every Self-Registration Page.
What should be configured in order to accomplish this request?

• A. Create child pages when creating new Self-Registration pages and select the "template" as Parent.
• B. Save the "template" page as Master Self'Registration page.
• C. Save this "template" page as a new Skin to be used on other Self-Registration pages.
• D. Copy the "template" page and edit it each time a new Self-Registration Page is needed.

Answer: B

NEW QUESTION # 54
What is used to validate the EAP Certificate? (Select two.)

• A. Date
• B. SAN entries
• C. Key usage
• D. Common Name
• E. Server Identity

Answer: B,C

NEW QUESTION # 55
......

The exam is designed to test the candidate's knowledge of the ClearPass platform and its various components, including access control, policy management, and guest management. The exam also covers topics such as network design, authentication and authorization, and network access control. Candidates will be required to demonstrate their ability to configure and troubleshoot ClearPass solutions in a variety of scenarios.

 

Detailed New HPE6-A81 Exam Questions for Concept Clearance: https://torrentpdf.validvce.com/HPE6-A81-exam-collection.html