Cisco Certified Network Associate Exam Practice Tests 2025 | Pass 200-301 with confidence!
Practice CCNA 200-301 exam. Online Exam Practice Tests with detailed explanations!
To prepare for the Cisco 200-301 certification exam, candidates can take advantage of various study materials, including official Cisco training courses, study guides, and practice exams. They can also join online communities and forums to interact with other candidates and network professionals. Cisco Certified Network Associate Exam certification exam is a valuable credential for network professionals who want to enhance their career prospects and stay up-to-date with the latest networking technologies.
Cisco 200-301 certification exam is designed to test the candidate's knowledge and skills related to networking technologies and concepts. 200-301 exam consists of 120 questions that need to be completed in 120 minutes. The questions are a combination of multiple-choice, drag and drop, and simulation-based questions. 200-301 exam can be taken at any Pearson VUE testing center worldwide. To pass the exam, candidates need to score at least 825 out of 1000. Preparing for the CCNA exam involves studying the exam topics thoroughly, practicing with simulation-based questions, and taking practice exams.
For more info read reference:
CCNA Official Certification Site
NEW QUESTION # 503
Refer to the exhibit.
Based on the LACP neighbor status, in which mode is the SW1 port channel configured?
- A. active
- B. auto
- C. passive
- D. mode on
Answer: A
Explanation:
From the neighbor status, we notice the "Flags" are SP. "P" here means the neighbor is in Passive mode. In order to create an Etherchannel interface, the (local) SW1 ports should be in Active mode. Moreover, the "Port State" in the exhibit is "0x3c" (which equals to "00111100 in binary format). Bit 3 is "1" which means the ports are synchronizing -> the ports are working so the local ports should be in Active mode.
NEW QUESTION # 504
Which command prevents passwords from being stored in the configuration as plain text on a router or switch?
- A. enable secret
- B. service password-encryption
- C. enable password
- D. username cisco password encrypt
Answer: B
Explanation:
Section: Security Fundamentals
NEW QUESTION # 505
Which two statements about GRE tunnels are true? (Choose two.)
- A. They add 8 bytes to the IP header of each packet.
- B. They provide privacy, integrity, and authenticity
- C. They allow multicast traffic to traverse WAN circuits
- D. They can operate in tunnel mode and transport mode
- E. They encapsulate the payload.
Answer: C,E
NEW QUESTION # 506
Refer to Exhibit.
Which configuration must be applied to the router that configures PAT to translate all addresses in VLAN 200 while allowing devices on VLAN 100 to use their own IP addresses?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: D
NEW QUESTION # 507
Drag the descriptions of IP protocol transmissions from the left onto the IP traffic types on the right.
Answer:
Explanation:
NEW QUESTION # 508
A network engineer must create a diagram of a multivendor network. Which command must be configured on the Cisco devices so that the topology of the network can be mapped?
- A. Device(config)#flow-sampler-map topology
- B. Device(config)#cdp run
- C. Device(config)#lldp run
- D. Device(config-if)#cdp enable
Answer: C
Explanation:
Section: Network Access
NEW QUESTION # 509
Where does wireless authentication happen?
- A. radio
- B. Layer 2
- C. SSID
- D. band
Answer: B
NEW QUESTION # 510
Drag and drop the functions from the left onto the correct network components on the right
Answer:
Explanation:
NEW QUESTION # 511
Drag the descriptions of device management from the left onto the types of device management on the right.
Answer:
Explanation:
NEW QUESTION # 512
Which JSON data type is an unordered set of attribute-value pairs?
- A. string
- B. array
- C. Boolean
- D. object
Answer: D
Explanation:
Section: Automation and Programmability
NEW QUESTION # 513
Router A learns the same route from two different neighbors, one of the neighbor routers is an OSPF neighbor and the other is an EIGRP neighbor. What is the administrative distance of the route that will be installed in the routing table?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
The Administrative distance (AD) of EIGRP is 90 while the AD of OSPF is 110 so EIGRP route will be chosen to install into the routing table.
NEW QUESTION # 514
which two values are needed to run the APIC-EM ACL Analysis tool? (choose two)
- A. destination address
- B. periodic refresh intervlan
- C. protocol
- D. destination port
- E. source address
- F. source port
Answer: A,E
NEW QUESTION # 515
Refer to Exhibit.
How does SW2 interact with other switches in this VTP domain?
- A. It processes VTP updates from any VTP clients on the network on its access ports.
- B. It receives updates from all VTP servers and forwards all locally configured VLANs out all trunk ports
- C. It transmits and processes VTP updates from any VTP Clients on the network on its trunk ports
- D. It forwards only the VTP advertisements that it receives on its trunk ports.
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/lan-switching/vtp/10558-21.html The VTP mode of SW2 is transparent so it only forwards the VTP updates it receives to its trunk links without processing them.
NEW QUESTION # 516
An engineer must configure traffic for a VLAN that is untagged by the switch as it crosses a trunk link. Which command should be used?
- A. switchport trunk encapsulation dot1q
- B. switchport trunk native vlan 10
- C. switchport trunk allowed vlan 10
- D. switchport mode trunk
Answer: B
NEW QUESTION # 517
Drag and drop the characteristics of network architectures from the left onto the type of architecture on the right.
Answer:
Explanation:
NEW QUESTION # 518
Refer to the exhibit.
A network technician is asked to design a small network with redundancy. The exhibit represents this design, with all hosts configured in the same VLAN.
What conclusions can be made about this design?
- A. The connection between switches should be a trunk.
- B. The router interfaces must be encapsulated with the 802.1Q protocol.
- C. The router will not accept the addressing scheme
- D. Spanning-tree will need to be used
- E. The design will function as intended
Answer: C
NEW QUESTION # 519
What is used to identify spurious DHCP servers?
- A. DHCPACK
- B. DHCPREQUEST
- C. DHCPOFFER
- D. DHCPDISCOVER
Answer: C
Explanation:
DHCPOFFER is used to identify spurious DHCP servers. A spurious DHCP server is any device that is configured to act as a DHCP server without the network administrator's knowledge or permission. A spurious DHCP server can cause network problems by assigning incorrect or duplicate IP addresses to clients, or by redirecting traffic to malicious gateways. To prevent such attacks, the DHCP snooping feature can be enabled on switches to filter out invalid or unauthorized DHCP messages from untrusted sources1.
DHCP snooping works by intercepting and validating DHCP messages on a per-VLAN basis. The switch maintains a DHCP snooping binding database that contains information about the trusted hosts with leased IP addresses, such as MAC address, IP address, lease time, binding type, VLAN number, and interface information2. The switch also classifies its ports as trusted or untrusted. Trusted ports are those that connect to authorized DHCP servers or other trusted switches. Untrusted ports are those that connect to untrusted hosts or devices. The switch only allows DHCP messages from trusted ports, and drops any DHCP messages from untrusted ports that do not match the information in the binding database3.
The switch uses DHCPOFFER messages to identify spurious DHCP servers. A DHCPOFFER message is a response from a DHCP server to a client's request for an IP address. The message contains the offered IP address, subnet mask, default gateway, and other configuration parameters for the client4. When the switch receives a DHCPOFFER message from an untrusted port, it compares the source MAC address and the offered IP address with the binding database. If there is no match, the switch considers the message as coming from a spurious DHCP server and drops it. The switch also logs an error message and increments a counter for the number of dropped messages5.
References:
* 1: Configuring DHCP Snooping - Cisco
* 2: Catalyst 6500 Release 12.2SX Software Configuration Guide - DHCP Snooping Binding Database
* 3: What is DHCP Snooping? - IONOS
* 4: Dynamic Host Configuration Protocol (DHCP) and Bootstrap Protocol (BOOTP) Parameters
* 5: Configuring DHCP Snooping - Cisco
NEW QUESTION # 520
......
The best 200-301 exam study material and preparation tool is here: https://torrentpdf.validvce.com/200-301-exam-collection.html
